WHITELINE KCA387 set of silent blocks and steering rack bushings for MITSUBISHI EVO 7/8/9
Quantity:
This item is considered special order and is not available for immediate pickup or dispatch. Price and ETA may vary. Please note that no returns, cancellations, or refunds allowed on special orders.
Pickup available at Kelberg Warehouse
Usually ready in 24 hours
WHITELINE KCA387 set of silent blocks and steering rack bushings for MITSUBISHI EVO 7/8/9
Kelberg Warehouse
Pickup available, usually ready in 24 hours
Auf der Struth 4
53539 Kelberg
Germany
Nürburgring Showroom
Pickup available, usually ready in 24 hours
Nürburgring Boulevard 2
53520 Nürburg
Germany
Code: Z279
Warning: Please drive carefully while you accustom yourself to the changed vehicle behaviour.
Application:
Mitsubishi Lancer Evolution VII VIII
KCA387 - Steering Precision Kit is designed to improve the steering feel, precision and response while reducing
understeer and increasing front grip specifically on turn-in. This is achieved through the use of low compliance
replacement mounting bushes and special spacers to alter steering geometry.
Contents:
Each kit contains:
1 x Power steering mounting bush - passenger side
4 x Power steering mounting bush - driver side
2 x Power steering mounting bush tubes - driver side
1 x Alloy spacer plate - passenger side
2 x High tensile steel spacer discs - driver side
Fitting:
Please read the complete instructions before commencing work.
1. Whiteline recommend that all work be carried out by a qualified technician. Fitting is best done with the vehicle on a
hoist.
2. It is recommended to measure wheel alignment settings prior to fitment.
3. Remove original steering mount bushes. This will require removing or partially removing of cross-member, exhaust and
other related parts to gain access to steering rack mounts.
4. Fit new KCA387 steering rack mounting bushes.
5. During assembly of the steering rack onto the cross-member, fit spacer plate on the passenger side, and 2 spacer
discs on the drivers side, between bushes and the cross-member.
6. Reassemble steering rack, cross-member, exhaust and all other related parts.
7. Test drive the vehicle, and check tension on all fasteners.
8. Measure wheel alignment, and adjust as required.
9. Check & re-tension all fittings again after 100 kms but no more than 200 kms.